Support Center

How to Reset My Snom Phone

Last Updated: May 22, 2012 01:30PM CDT

Warning: All current configuration settings on your SNOM Phone will be lost!

 

To reset a Snom VoIP Telephone back to its Default Factory Settings, use one of the following methods:
  • Unplug the phone. 
  • Press the hash key (#). 
  • Plug the phone back in, keeping the # key depressed. 
  • Continue pressing the # key until the Rescue Mode screen is displayed (approximately 18 to 20 seconds). 
  • Once the Rescue Mode screen is displayed, press option 1 (Settings reset). 
 
You can also use the phone display without unplugging the phone, but you will need to know the admin password (default is 0000). 
  • Tap Menu from the phone display or Keypad.
  • Select Maintenance. 
  • Select User Mode. 
  • Select Administrator Mode. 
  • Enter administrator password. 
  • Select Reset Values, then press the confirm key. 
  • Wait for prompt. The phone will now reboot.

 

警告:所有您的SNOM手机上的配置将会丢失!


请用以下一种方法: 

  • 拔掉电话电源 
  • 按下重置键。(#). 
  • 保持按住此键不放,重新给电话插电。 
  • 持续按住此键知道解救模式屏幕显示。(大约18到20秒) 
  • 当解救模式屏幕显示,按选项1。(重置设置) 


您也可以不用拔掉电话电源,但是您需要知道您的管理员密码(默认值是0000)。 

  • Tap from the phone display. 
  • 选择保持。 
  • 选择用户模式。 
  • 选择管理员模式。 
  • 输入管理员密码。 
  • 选择重置值,然后按下确认键。 
  • 等待提示。

Contact Us

support@atomampd.com
http://assets1.desk.com/
false
atomampd
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete